This project requires a few basic tools: a saw (a chop saw would make it really simple, but you can use a handsaw if that’s all you have) and a drill. Today, companies are capable of producing incredibly realistic looking wood floors out of vinyl material. Another important aspect of vinyl wood flooring that makes it attractive to homeowners is the ease in maintaining it. Just a damp mop with some all-purpose cleaner is all that’s required to clean these floors. However, the one major drawback of vinyl wood plank floors are their inability to be re-finished and relatively short life-span compare to solid wood floors. Depending on the thickness, manufacturer, and foot traffic volume, vinyl wood plank floors last about an average of 5 to 8 years. The options for a specific wood look are similar between hardwood and vinyl planks.
Solid wood floors afford the homeowner the ability to re-finish them several times, even allowing for the ability to change stain variations and colors. But what really makes vinyl wood flooring so attractive to handy homeowners is the ease in which these floors are installed. When considering installing one of these floors it’s important to know that they can be installed over both a concrete or wood sub-floor. Unlike wood flooring, vinyl wood plank floors don’t require a miter saw to complete the cuts around the room. After the class we got a 10% to use in the store and that’s when I saw the wood planks.
The vinyl material allows planks to be cut to size with nothing more than a good utility knife and an accurate tape measure. Now, consumers have countless options in styles and colors to choose from when it comes to vinyl wood plank floors. Because it’s so easy to install and requires very little tools, even a novice do-it-yourself homeowner could install a vinyl wood plank floor with great results. The 3 major manufacturers of vinyl wood plank flooring are Karndean, Earthwerks and Nafco.
If these vinyl planks are good enough to handle traffic for the nation’s largest retailer, they should hold amazingly in your kitchen, living room or any other area in your home. When shopping for vinyl planks don’t miss out on the deals at on all 3 of these brands of Vinyl Wood Plank flooring. The texture of the floor shall be retained for a long time down the line if you follow the cleaning instructions judiciously. With regards to the best wood to use as a beginner, you are best off choosing inexpensive cuts of natural wood, or processed boards. These realistic-looking planks are then topped with an impermeable, scratch and stain resistant clear topcoat.
Balsa is a very soft and light wood which can be cut with a craft knife, and is probably the best type to use for kid’s crafts (such as air planes). I also like using MDF (which is a processed fiberboard), and plywood (which consists of thin layers of wood glued on top of each other). You then use the jigsaw to remove the corners as best you can, before using a file and/or sandpaper to remove any excess wood and straighten the edges, so that you go right up to the pencil lines. If you have a router, this can help you getting perfectly straight sides, using a straight-edged piece of scrap wood as a guide.