So you decided to go ahead and replace your current floor with real slate stone tile flooring. Available in both plank and tile formats, Pergo vinyl floors are extremely easy to install thanks to our revolutionary PerfectFold 3.0 click system. Our distinctive wood designs for example, are created using an embossing technique that follows every nuance in the wood, creating a genuinely authentic look. Proper installation of sheet vinyl flooring actually requires a high level of skill, in addition to specific training. Sheet vinyl products have their own set of instructions and factory-approved compatible products.
Underlayment, adhesives, nailing patterns, subfloor, and seam-sealers are not always interchangeable between different types of vinyl. Every component of the installation must be factory-approved for use with the specific type of vinyl being installed. The major sheet vinyl manufacturers print detailed instructions and guides that should be followed, and they also offer extensive factory training for professional installers. When sheet vinyl flooring is incorrectly installed, it leads to problems down the line. These are rarely used and are appropriate only where heavy wear has worn the surface of the vinyl floor away, such as is common in commercial and public buildings.
For the first 24 hours after new vinyl flooring has been installed, all the seamed areas should be protected, and the seam sealer should not be walked on. The temperature of the room should be kept at around 68° F for at least two days after installation to allow the adhesives to set up properly. Numerous types of underlayment can be paired with sheet vinyl, and it is important to correctly match products approved for use by the factory with the specific type of vinyl being installed.
The underlayment must be completely free of any ink, oils, dirt, factory stamps, and residue from old adhesives before it is covered with vinyl in order to ensure that surface irregularities or adhesive failure do not occur. A stripping solution (often provided by the manufacturer at the time of installation) is designed to remove the inevitable buildup of oils and soap residue that accumulate over time, even with regular maintenance.
The refinisher re-seals the vinyl and adds a lustrous coating to its surface, but should be used only when the vinyl floor’s original surface has been compromised, and not as a polish. Small cuts and scratches can be permanently fused with liquid seam-sealer, a clear compound that’s available wherever vinyl flooring is sold. He warned me that these cheap tiles wouldn’t last long and said I was wasting my time.