What are the Most Usual Types of Foundation Repair?
Of all the home repairs a homeowner might have, the most petrifying home repair is a problem with the house foundations. Replacing your roof is pretty easy; but, repairing your home foundation is a whole different side of it. After all, the foundation supports every part of your house. And, if you do not know, this problem is commonly caused by just one thing, -water. This is the mere reason why you really need the help of Foundation Repair Contractors when addressing this home repair issue.
Furthermore, a method in repairing a foundation might also vary depending on the condition of the site and the geographic area for the repair. Until the late 1970s came, using concrete is the most usual method used. So, below is a list of some of the most common foundation repairs in these days.
Firstly, we have the Helical Piers. Helical Piers are purposely made for interior slab repairs and exterior foundation repairs. Helical Piers are also useful as a repair method or even for a new construction. Also, helical piers are best matched by light loaded areas such as structures with vinyl siding or porch columns. In these days, helical piers are the most adaptable and underused piers in the market.
Next is we have the Steel Piers. The launch of steel piers restructured the process of foundation repair. When implemented, steel piers do not disturb a lot of landscapes and take less time as compared with the traditional concrete piers. Steel piers have no evolved and become more specialized to install.
Thirdly, we have the High Density Polyurethane Foam. With High Density Polyurethane slab restoration is simplified. In here, insertion or injection of the foam in a checkerboard grid that is approximately 7 feet on the center of the moved area happens. Also, High Density Polyurethane has now become popular in the market because of the price and repair speed it offers. But the thing is, the consumers must also remain cautious and careful if the Heating, Ventilation, and Air Conditioning ducts runs through the bottom because the foam might enter and obstruct them. Consumers also must take not e that they have to perform plumbing tests to make sure that there are no leaks in the drain lines or in the supplies.
Fourth is the Concrete Pier Foundation Repair. Foundation Repair Contractors usually use poured in place concrete piers in the initial construction phase of structures. But, these can also work well with foundation repairs. This was the best method of foundation repair before the introduction of the hydraulic driven steel pier.
Fifth is that we have the Segmented Pier. This is relatively one of the latest existing products in the industry. This product for foundation repair is popular in the industry since it is not that expensive.